rockvilleaudio

حزمة Control 25-1 أبيض 4 قطع + حزمة Control 16C/T أبيض 2 قطعة + RCS180-6

حزمة Control 25-1 أبيض 4 قطع + حزمة Control 16C/T أبيض 2 قطعة + RCS180-6 - Main image
$604.9 $1209.8 In stock

Category: الصوتيات التجارية

محتويات العبوة:
  • (1) مضخم Rockville RCS180-6 بقدرة 180 واط، 6 مناطق، 70 فولت، تجاري/مطاعم، مع بلوتوث
  • (2) زوج من مكبرات الصوت JBL Control 25-1 مقاس 5.25 بوصة، 30 واط، 70 فولت، للتركيب على الحائط، تجارية للمطاعم/الحانات
  • (1) زوج من مكبرات الصوت JBL CONTROL 16C/T مقاس 6.5 بوصة، 30 واط، 70 فولت، تجارية للسقف، للمطاعم/الحانات

كيفية إعداد سلسلة مضخمات RCS:


فيديو RCS180-6:


يتضمن:

  • مضخم
  • جهاز تحكم عن بعد
  • أذناب تركيب على الحامل
  • كابل الطاقة
  • هوائي راديو FM
  • دليل المالك
  • الضمان

الوصف:

تفتخر Rockville بتقديم سلسلة RCS الجديدة من المنتجات. RCS180-6 هو مضخم/مستقبل هجين رقمي بقوة 180 واط، و6 مناطق، قابل للتركيب على حامل. هذا المضخم قادر على العمل بجهد 70 فولت، 100 فولت، 8 أوم، و4 أوم. مما يجعله مثاليًا للاستخدام في المطاعم/الحانات/المقاهي/الصالات/المدارس/قاعات الاجتماعات أو أي مكان آخر يتطلب العديد من مكبرات الصوت.
يوفر هذا الطراز 180 واط عند 70 فولت، ويمكنك إما استخدام أطراف التوصيل لتطبيقات منطقة واحدة أو استخدام مخرجات أسلاك السماعات وتقسيم الطاقة إلى 6 مناطق. (لا تتجاوز 100 واط على منطقة واحدة). يمكن أن تحتوي كل منطقة على عدد غير محدود من مكبرات الصوت الموصلة بالتوازي. يمكنك أيضًا تقسيم 180 واط إلى 6 مناطق كما يحلو لك. على سبيل المثال، يمكنك وضع 25 واط لكل منطقة من المناطق الست، أو 50 واط لمنطقتين و12 واط لكل منطقة من المناطق المتبقية. ببساطة، إذا كان إجمالي الواط أقل من 180 فأنت بخير. (يوصي معظم المحترفين بعدم تجاوز 80% من طاقة المضخم. نوصي بألا يزيد إجمالي واط مكبرات الصوت عن 150 واط على مخارج السماعات.
مع 3 مدخلات ميكروفون؛ كل منها مع تحكم في الصدى، يمكنك استخدام هذا المضخم للإعلانات أو الخطب أو حتى ليلة الكاريوكي! يتضمن هذا الطراز أيضًا زر جرس حتى تتمكن من إنشاء صوت جرس قبل الإعلانات. تتميز سلسلة RCS ببث صوت Bluetooth حتى تتمكن من تشغيل الموسيقى المفضلة لديك أو الوصول إلى قائمة التشغيل مباشرة من هاتفك! يتميز هذا المضخم أيضًا بمدخلات USB و SD مما يسمح لك بتشغيل الصوت المخزن على محرك أقراص USB أو بطاقة SD. هناك أيضًا مدخلان للخط يسمحان لك بتوصيل جهاز صوتي آخر مثل مشغل MP3 أو مشغل أقراص مضغوطة أو تلفزيون وما إلى ذلك. هذا هو إصدارنا الجديد والمحسن الذي يحتوي الآن على مدخل بصري حتى تتمكن من توصيله بمصدر رقمي مثل التلفزيون أو جهاز العرض.
مقابض تحكم في مستوى الصوت لكل منطقة من المناطق الست ومقابض تحكم لكل من مدخلات الميكروفون الثلاثة تمنحك تحكمًا كاملاً في نظامك.
تحمي وظيفة محدد القطع المدمجة مكبرات الصوت والمضخم من ارتفاع الحرارة. لمزيد من الحماية، يوجد أيضًا نظام تبريد في هذا المضخم يحافظ على برودة المكونات مما يجعل المضخم متينًا وموثوقًا.eliable.
هذا هو إصدارنا الجديد والمحسن مع أطراف مكبرات صوت من النوع الأوروبي (Euro-block) التي تجعل تركيب الأسلاك سهلاً للغاية حتى إذا كان جهاز الاستقبال مخفيًا في الزاوية. الأطراف قابلة للفصل وبمجرد توصيل سلك السماعة بالطرف، فإنه ينقر ببساطة في جهاز الاستقبال.
كان هدفنا من سلسلة RCS هو جعل من الممكن لأي شخص تركيب أنظمة 70 فولت بنفسه دون إنفاق آلاف الدولارات على مقاول. يجعل هذا الطراز توصيل العديد من مكبرات الصوت ومصادر خارجية متعددة أمرًا سهلاً للغاية. نستخدم عمدًا موصلات شائعة مثل RCA و 1/4 بوصة في طرازنا لجعل هذا أكثر عالمية وسهولة في الاستخدام. مع تصميمنا الفريد، يمكنك أن تشعر بالثقة في قدرتك على القيام بذلك بنفسك عند تثبيت نظامنا التجاري!

ما هو 70 فولت؟
أنظمة 70 فولت هي الخيار الأول لأي تطبيق تريد فيه تركيب مكبرات صوت متعددة. مع 70 فولت هناك العديد من المزايا مقارنة بأنظمة 8 أوم. واحدة من المزايا الرئيسية هي بساطة الأسلاك وكذلك سهولة مطابقة مكبرات الصوت مع المضخم. على سبيل المثال، مع هذا المضخم 180 واط / 70 فولت، يمكنك تركيب مكبرات صوت يبلغ مجموعها قريبًا من 150 واط. لا يهم ما إذا كانت 10 مكبرات صوت بقدرة 15 واط لكل منها أو 25 مكبر صوت بقدرة 5 واط لكل منها. يجب أن تحتفظ دائمًا بمضخم 70 فولت بقدرة أكبر بنسبة 15 أو 20% على الأقل من إجمالي واط مكبرات الصوت لديك. عندما نقول كلمة
70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.
The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS180-6 is your best choice!

Applications:

  • Restaurant
  • Bar
  • Café
  • School
  • Lounge
  • Home (Multi-zone, Multi-room)
  • Office
  • Warehouse

Features:

  • Rockville RCS180-6 180 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
  • Capable of 70 volt, 100 volt, 8ohm, and 4 ohm
  • 70/100 volt RMS Power: 184 Watts
  • 4-16 ohm binding post speaker output
  • 6-Zones of speaker outputs - each zone has a separate volume control
  • 70 and 100 volt binding post outputs for single zone playback of all 180 watts
  • Built in Bluetooth audio streaming
  • FM radio tuner
  • USB input to play audio stored on a thumb drive (32gb max)
  • SD card slot to play music stored on an SD Card (32gb max)
  • Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
  • Echo control for the mic inputs with speed and repeat adjustments
  • Built in clipping limiter to protect the amp and speakers
  • BASS and Treble control
  • Detachable euro-block speaker output terminals for easy installation
  • Chime button for making announcements
  • Top quality aluminum panel with industrial grade knobs
  • 5 segments signal level indication
  • Built in cooling system keeps component cool at all times

Inputs and Outputs:

  • (1) Set RCA AUX inputs
  • (3) Mic inputs
  • RCA Line output
  • Optical input
  • Detachable euro-block speaker output terminals for easy installation
  • 100V speaker red positive speaker output terminal
  • 70V speaker red positive speaker output terminal
  • 8 Ohm red positive speaker output terminal
  • Shared negative speaker output terminal

Specifications:

  • Power Requirements: 120V / 50-60Hz
  • A Weighted Signal to Noise (@ 1W) -68.1dBA
  • A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA
  • Frequency response: 49Hz to 14.9 Khz
  • Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%
  • Weight: 22.7lbs
  • Dimensions: 19” x 16” x 4” inches

Authorized JBL Dealer! 

Description of Control 25-1-WH:

Designed by JBL, these Control 25-1 loudspeakers are two-way 5.25" indoor/outdoor monitors featuring weather-protected circuitry, natural and powerful representations of the frequency spectrum, white enclosures, and JBL's proprietary InvisiBall mounting hardware. This hardware allows you to install the speakers through a hidden access point behind its logo badge. As such, the Control 25-1 suitable for venues, health clubs, theme parks, cafes, or anywhere where foreground/background music—and paging—is a necessity.

These monitors are capable of handling 200W of programmatic material at 8 Ohms, and feature a built-in multi-tap transformer for operation on distributed speaker lines. With an SPL of 110 dB, you can blast these speakers pretty loudly as well, while their cone geometry ensures a pleasurable listening experience in both on- and off-axis situations. Additionally, their PEI diaphragms render a smooth high-frequency response. But sound is not the only consideration: Kapton voice coil formers, JBL's WeatherEdge rubberized extensions, and a durable cabinet construction provide protection against heat, rain, wind, or anything else the elements might throw at you in the coming years.

Also, while the Control 25-1 comes in a white finish, it doesn't have to stay that way: these speakers accept a variety of finishes and pigments to match any surrounding.

Features:

  • 2 JBL Control 25-1 5.25" 100w White Surface-Mount Speakers 4 Home/Restaurant/Bar
  • 5.25" Woven-Fiberglass LF Drivers
  • 0.75" PEI Diaphragm Tweeters
  • 200W RMS at 8 Ohms
  • Durable, Weatherized Enclosures
  • InvisiBall Mounting Hardware
  • Zinc-Plated Grilles
  • Good for Off-Axis Listening
  • 60 Hz to 20 kHz Frequency Response

Specifications: 

  • Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h)
  • Nominal Impedance: 8 ohms (THRU setting)
  • Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak
  • Frequency Response ± 3dB: 85 Hz to 17 kHz
  • Frequency Response ±10 dB: 60 Hz to 20 kHz
  • Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz)
  • Coverage Angle: 100° x 100°
  • Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz)
  • Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz)
  • Crossover Type: 2nd order low-pass, 2nd order high-pass
  • Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal
  • Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings)
  • LF Driver Size: 5.25" / 135 mm
  • HF Driver Size: 0.75" / 19 mm
  • Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former
  • Enclosure Material: High-impact polystyrene (HIPS)
  • Grille: Highly zinc-plated, finished in durable TGIC polyester powder-coating
  • Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2)
  • Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray
  • Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876
  • Dimensions (H x W x D): 9.6 x 7.4 x 5.7" / 243 x 188 x 145 mm
  • Weight: 7.5 lb / 3.4 kg
  • Package Weight: 18.0 lb
  • Box Dimensions (LxWxH): 16.0 x 11.75 x 11.4"

Authorized JBL Dealer 

Description of CONTROL 16C/T:

Two-Way 6.5" Coaxial Ceiling Loudspeaker

Control 16C/T is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

Features:

  • (2) JBL CONTROL 16C/T 6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar
  • Components:
    • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
    • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
  • Blind-mount backcan for quick and easy install
  • Dual conduit/cable clamps
  • Combined 70V/100V and low impedance direct operation
    • 50 Watts at 8O nominal setting
    • 30W multi-tap at 70V/100V
  • 62 Hz – 20 kHz bandwidth with wide 110° coverage
  • High 91 dB sensitivity for high maximum SPL
  • Color: White

Specifications:

  • Frequency Range (-10 dB): 62 Hz – 20 kHz
  • Power Capacity (at low-Z)
    • 100 Watts Continuous Program Power
    • 50 Watts Continuous Pink Noise
  • Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
  • Frequency Response (±3 dB): 96 Hz – 15 kHz
  • Nominal Sensitivity: 91 dB
  • Nominal Coverage Angle: 110° conical coverage
  • Directivity Factor (Q): 7.8
  • Directivity Index (DI): 8.2 dB
  • Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
  • Nominal Impedance: 8 ohms (in direct/bypass 8O setting)
  • Crossover Network
    • 12 dB/oct (2nd order) low-pass to LF driver,
    • 12 dB/oct (2nd order) high-pass to HF driver
  • LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
  • HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
  • Input Connector: Removable locking 4-pin connector with screw-down terminals.
    Max wire size 12 AWG (2.5 mm2)
  • Connector Wiring: Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
  • Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
  • Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated 
    steel backcan
  • Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
  • Dimensions
    • 253 mm diameter x 225 mm depth from back of baffle
    • (10.0 in diameter x 8.8 in depth)
  • Ceiling Cutout Size: Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout
    template included)
  • Ceiling Thickness Range: Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses
  • Safety Seismic Attachment: One point, top surface
  • Net Weight: 3.4 kg (7.4 lbs, one speaker)
  • Shipping Weight: 11.2 kg (24.7 lbs, pair in master carton)
  • Included Accessories: C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille
  • Optional Accessories
    • MTC-26NC new construction bracket
    • MTC-26MR mud-ring construction bracket
    • MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers) 
    • MTC-48TR tile rail for 1200 mm (4 ft) tile spans


 Advantages of purchasing from an authorized seller:

·         Best prices - We sell all JBL Products at wholesale prices
·         Full Factory Warranty
·         Detailed information of all products
·         Lifetime Customer Service by JBL product Experts
·         Guaranteed legitimate and authentic merchandise
Please note:  If you purchase JBL from an un-authorized seller then you are taking a big risk.  You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new,  or even working.