CC80T أبيض 12 قطعة + RCS180-6 6 مناطق 180W أمبير باقة
Category: الصوتيات التجارية
- (1) مضخم صوت Rockville RCS180-6 180 واط 6 مناطق 70 فولت تجاري/مطعم مع بلوتوث
- (6) أزواج من سماعات السقف Rockville CC80T بيضاء 8 بوصة تجارية 70 فولت للمطاعم/الحانات
كيفية إعداد سلسلة مضخمات RCS الخاصة بك:
فيديو RCS180-6:
يتضمن:
- مضخم الصوت
- جهاز التحكم عن بعد
- آذان تثبيت الرف
- كابل الطاقة
- هوائي راديو FM
- دليل المالك
- الضمان
الوصف:
ما هو نظام 70 فولت؟
Applications:
- Restaurant
- Bar
- Café
- School
- Lounge
- Home (Multi-zone, Multi-room)
- Office
- Warehouse
Features:
- Rockville RCS180-6 180 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
- Capable of 70 volt, 100 volt, 8ohm, and 4 ohm
- 70/100 volt RMS Power: 184 Watts
- 4-16 ohm binding post speaker output
- 6-Zones of speaker outputs - each zone has a separate volume control
- 70 and 100 volt binding post outputs for single zone playback of all 180 watts
- Built in Bluetooth audio streaming
- FM radio tuner
- USB input to play audio stored on a thumb drive (32gb max)
- SD card slot to play music stored on an SD Card (32gb max)
- Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
- Echo control for the mic inputs with speed and repeat adjustments
- Built in clipping limiter to protect the amp and speakers
- BASS and Treble control
- Detachable euro-block speaker output terminals for easy installation
- Chime button for making announcements
- Top quality aluminum panel with industrial grade knobs
- 5 segments signal level indication
- Built in cooling system keeps component cool at all times
Inputs and Outputs:
- (1) Set RCA AUX inputs
- (3) Mic inputs
- RCA Line output
- Optical input
- Detachable euro-block speaker output terminals for easy installation
- 100V speaker red positive speaker output terminal
- 70V speaker red positive speaker output terminal
- 8 Ohm red positive speaker output terminal
- Shared negative speaker output terminal
Specifications:
- Power Requirements: 120V / 50-60Hz
- A Weighted Signal to Noise (@ 1W) -68.1dBA
- A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA
- Frequency response: 49Hz to 14.9 Khz
- Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%
- Weight: 22.7lbs
- Dimensions: 19” x 16” x 4” inches
Description:
The CC80T are perfect for any commercial application where you want tget amazing sound quality out of your music and have the ability tcrank the volume really loud. It will obviously still handle your PA announcements and chimes, etc. We took a high quality home theater speaker and added 70 volt technology t it tgive you the best of both worlds. With a selectable tap wattage that ranges from 2.5w all the way t20w these speakers are great for any commercial application.
These ceiling speakers are precision tuned for excellent audiresponse at high
and low volumes. If you want good musical sound you really need a 2-way speaker
with a dedicated tweeter for highs and a dedicated woofer for lows. These
in-ceiling speakers feature an 8” polypropylene woofer cone for clear, rich mids
and deep bass. Our mylar dome tweeter provides clean, crisp highs. The included
sheer grill enables flush installation and can be painted tmatch any décor.
Our high quality spring loaded push terminals make your wiring very secure.
Features:
There is a tap switch on the speaker syou can easily select how many watts you want the speaker tget from the amp.
70V Power Options:
8 Ohm power handling:
What is 70 volt?
70 volt systems are the number one choice for applications where you want t install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 150 watts and you can install speakers that total around 120 watts. It does not matter if it is 12 speakers that are 10 watts each or 24 speakers that are tapped at 5 watts each. You always want your 70 volt amp t have at least 15 to 20% more power than the combined watts your speakers are tapped at.
When we say the word tap, we are referring to the switch that is located on the rear of these speakers where you can select how many watts you want the speaker to play. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 6 watts, and the hallway or bathroom speakers at 3 watts.
Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc. 70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads.
The wiring is simple. You just wire all the positive terminals of the speakers tthe positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
