rockvilleaudio

حزمة مضخم C50PACK Sub + Control 28-1 8-Pack + RCS350-6

حزمة مضخم C50PACK Sub + Control 28-1 8-Pack + RCS350-6 - Main image
$907.4 $1814.8 In stock

Category: الصوتيات التجارية

مكونات العبوة:
  • (1) مضخم Rockville RCS350-6 350 واط 6 مناطق 70 فولت تجاري/مطعم مع بلوتوث
  • (1) مضخم صوت JBL C50PACK تجاري + (4) مكبرات صوت تابعة للمطعم/البار/المقهى
  • (2) زوج من مكبرات الصوت JBL Control 28-1 8 بوصة 60 واط 70 فولت تجارية داخلية/خارجية للمطعم

كيفية إعداد سلسلة مكبرات الصوت RCS:


فيديو عن RCS350-6:

  • مضخم الصوت
  • جهاز التحكم عن بعد
  • أذنيات التركيب في الحامل
  • كابل الطاقة
  • هوائي راديو FM
  •  الوصف:

    تفتخر Rockville بتقديم سلسلة منتجات RCS الجديدة. RCS350-6 هو مضخم/مستقبل هجين رقمي بقدرة 350 واط مع 6 مناطق قابل للتركيب في الحامل. هذا المضخم قادر على العمل بجهد 70 فولت و100 فولت و8 أوم و4 أوم. وهذا يجعله مثاليًا للاستخدام في المطعم/البار/المقهى/الصالة/المدرسة/غرفة المؤتمرات أو أي مكان آخر يتطلب العديد من مكبرات الصوت.

    يوفر هذا الطراز 350 واط عند 70 فولت أو 100 فولت ويمكن تقسيم الطاقة إلى 6 مناطق. (يوصي معظم المحترفين بعدم تجاوز 80% من طاقة المضخم، لذلك نوصي ألا يتجاوز إجمالي واط مكبرات الصوت 300 واط على المحولات). يمكنك تقسيم الطاقة في كل منطقة كما يحلو لك. على سبيل المثال، يمكنك وضع كل 300 واط في منطقة واحدة مع التحكم في مستوى الصوت. أو يمكنك جعل المنطقة 1 بقدرة 100 واط، والمنطقة 2 بقدرة 100 واط وبقية المناطق بقدرة 25 واط لكل منها. فقط اجمع إجمالي الواط ليكون أقل من 350 وستكون بخير. لا حاجة لتوصيلات معقدة كما في أنظمة 8 أوم.

    مع 3 مداخل ميكروفون؛ كل منها مع تحكم في الصدى، يمكنك استخدام هذا المضخم للإعلانات أو الخطب أو حتى ليلة الكاريوكي! يتضمن هذا الطراز أيضًا زر جرس حتى تتمكن من إنشاء صوت جرس قبل الإعلانات. تتميز سلسلة RCS ببث صوتي عبر البلوتوث حتى تتمكن من تشغيل الموسيقى المفضلة لديك أو الوصول إلى قائمة التشغيل مباشرة من هاتفك! يتميز هذا المضخم أيضًا بمداخل USB وSD مما يسمح لك بتشغيل الصوت المخزن على محرك أقراص USB أو بطاقة SD. هناك أيضًا مدخلان للخط يسمحان لك بتوصيل جهاز صوتي آخر مثل مشغل MP3 أو مشغل أقراص مضغوطة أو تلفزيون وما إلى ذلك. هذا هو إصدارنا الجديد والمحسن الذي يحتوي الآن على مدخل بصري حتى تتمكن من توصيل هذا بمصدر رقمي مثل التلفزيون أو جهاز العرض.

    تتيح لك مقابض مستوى الصوت الفردية لكل منطقة من المناطق الست ومقابض مستوى الصوت لكل من مداخل الميكروفون الثلاثة التحكم الكامل في نظامك.

    تحمي وظيفة محدد القطع المدمجة مكبرات الصوت والمضخم من ارتفاع الحرارة. لمزيد من الحماية، يوجد أيضًا نظام تبريد في هذا المضخم يحافظ على برودة المكونات مما يجعل المضخم متينًا وموثوقًا.

    هذا هو إصدارنا الجديد والمحسن مع أطراف توصيل مكبرات الصوت من النوع الأوروبي التي تجعل من السهل جدًا تثبيت الأسلاك حتى إذا كان المستقبل مخفيًا في الزاوية. الأطراف قابلة للفصل وبمجرد توصيل سلك مكبر الصوت بالطرف، فإنه يستقر في المستقبل.

    كان هدفنا من سلسلة RCS هو تمكين أي شخص من تركيب أنظمة 70 فولت بنفسه دون إنفاق آلاف الدولارات على مقاول. هذا الطراز يجعل من السهل توصيل العديد من مكبرات الصوت ومصادر خارجية متعددة. نستخدم عمدًا موصلات شائعة مثل RCA و1/4 بوصة في طرازنا لجعله أكثر عالمية وسهولة في الاستخدام. مع تصميمنا الفريد، يمكنك أن تشعر بالثقة في قدرتك على القيام بذلك بنفسك عند تركيب نظامنا التجاري!

    أنظمة 70 فولت هي الخيار الأول لأي تطبيق تريد فيه تثبيت مكبرات صوت متعددة. مع 70 فولت هناك العديد من المزايا مقارنة بأنظمة 8 أوم. من المزايا الرئيسية بساطة الأسلاك وكذلك سهولة مطابقة مكبرات الصوت مع المضخم. على سبيل المثال، مع هذا المضخم بقدرة 350 واط / 70 فولت، يمكنك تثبيت مكبرات صوت يبلغ إجماليها حوالي 300 واط. لا يهم إذا كان 20 مكبر صوت بقدرة 15 واط لكل منها أو 40 مكبر صوت بقدرة 7.5 واط لكل منها. يجب أن يكون لديك دائمًا مضخم 70 فولت بقدرة أكبر بنسبة 15 أو 20% على الأقل من إجمالي واط مكبرات الصوت. عندما نقول كلمة
    70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.
    The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
    If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS350-6 is your best choice!

    Applications:

    • Restaurant
    • Bar
    • Café
    • School
    • Lounge
    • Home (Multi-zone, Multi-room)
    • Office
    • Warehouse

    Features:

    • Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
    • Capable of 70 volt, 100 volt, 8 ohm, and 4 ohm
    • 70/100 volt RMS Power: 350 Watts
    • 6-Zones – each zone has a separate volume control
    • Built in Bluetooth audio streaming
    • FM radio tuner
    • USB input to play audio stored on a thumb drive (32gb max)
    • SD card slot to play music stored on an SD Card (32gb max)
    • Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
    • Echo control for the mic inputs with speed and repeat adjustments
    • Built in clipping limiter to protect the amp and speakers
    • BASS and Treble control
    • Detachable euro-block speaker output terminals for easy installation
    • Chime button for making announcements
    • Top quality aluminum panel with industrial grade knobs
    • 5 segments signal level indication
    • Built in cooling system keeps component cool at all times

    Inputs and Outputs:

    • (1) Set RCA AUX inputs
    • (3) Mic inputs
    • RCA Line output
    • Optical input
    • 100V speaker red positive speaker output terminal
    • 70V speaker red positive speaker output terminal
    • 8 Ohm red positive speaker output terminal
    • Shared negative speaker output terminal

    Specifications:

    • Power Requirements: 120V / 50-60Hz
    • A Weighted Signal to Noise (@ 1W) -68.1dBA
    • A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA
    • Frequency response: 49Hz to 14.9 Khz
    • Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%
    • Weight: 22.7lbs
    • Dimensions: 19” x 16” x 4” inches

    Description of C50PACK:

    Packaged Surface-Mount Subwoofer-Satellite Loudspeaker System
    The Control 50 Series subwoofer-satellite loudspeaker system provides high fidelity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high fidelity foreground/background music is required from surfacemount system.

    Features:

    • JBL C50PACK Commercial Subwoofer+(4) Satellite Speakers For Restaurant/Bar/Cafe
    • Versatile four satellite speaker system
    • Stylish, unobtrusive design fits into a wide variety of decor
    • High fidelity sound
    • Selectable 70V/100V for distributed lines, or low impedance
    • Wall-mount brackets include
    • Available in black or white

    Specifications:

    • Frequency Range (-10 dB) 32 Hz – 20 kHz
    • Frequency Response (±3 dB) 50 Hz – 17 kHz
    • Power Capacity 200 Watts Continuous Program Power (100 hrs)
    • 100 Watts Continuous Pink Noise (100 hrs)
    • Nominal Sensitivity
    • (2.83V, 1m) 87 dB (subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note)
    • Nominal Impedance 4 ohms (in bypass/thru mode) with 4 satellites
    • Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance

    Description of Control 28-1:

    High Output Indoor/Outdoor Background/Foreground Speaker
    The Control 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

    Features:

    • Components:
    • 8” woofer with woven fiberglass cone
    • 1” PEI diaphragm tweeter with fluid cooling
    • Contemporary, high-design appearance
    • Built-in InvisiBall® mounting hardware*, plus available U-bracket
    • Weather resistant enclosure and transducers
    • Wide 100° x 100° coverage
    • 120 Watt power handling (240 Watt program) in direct 8O setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
    • High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

    Specifications:

    • Frequency Range: (-10 dB) 45 Hz to 20 kHz
    • Frequency Response: (+/-3 dB) 62Hz - 16 kHz
    • Power Rating:
    • 240 W Continuous Program (2 hrs)
    • 120 W (480W peak), Continuous Pink Noise (2 hrs)
    • 90 W (360W peak) Continuous Pink Noise (100 hrs)
    • Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peak
    • Maximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)
    • Sensitivity: 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
    • Coverage Angle: 100° x 100°
    • Directivity Factor (Q): 7.3 (averaged 1kHz – 16kHz)
    • Directivity Index (DI): 8.3dB (averaged 1kHz – 16kHz)
    • Nominal Impedance: 8 ohms (THRU setting)
    • Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shaping
    • Transformer Taps
    • 70V: 60W, 30W, 15W, 7.5W
    • 100V: 60W, 30W, 15W
    • Insertion Loss: <0.94 dB at any tap setting
    • Thru Setting: 8O nominal
    • Recommended Protective: High-Pass 45 Hz high-pass (24 dB/oct) for 8O operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
    • Low Frequency Driver: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
    • High Frequency Driver: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
    • Enclosure Material: High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
    • Grille: Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
    • Installation: InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
    • Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
    • Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
    • Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876
    • Colors: Black (RAL9004) or white (-WH, RAL9016)
    • Dimensions (H x W x D): 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
    • Net Weight: 6.8 kg (15.0 lbs)
    • Shipping Weight: 15.4 kg (34 lbs) pair-packed (for 2 speakers)
    • Included Accessories: InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
    • Optional Accessories:
    • MTC-28UB-1 – Yolk-type U-bracket (&-WH)
    • MTC-28WMG-1 – Weather Max grille with backing (&-WH)
    • MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)