حزمة WA6570 داخل الجدار 10 قطع + RCS650-6






Category: الصوتيات التجارية
مشمولات العبوة:
- (1) مضخم روكفيل RCS650-6 بقدرة 650 واط، 6 مناطق، 70 فولت، للمحلات التجارية/المطاعم مع بلوتوث
- (5) 2 سماعات حائط روكفيل WA6570 مقاس 6.5 بوصة، 70 فولت، للمحلات التجارية/المطاعم، 40 واط/20 واط/10 واط/5 واط
كل ما يتعلق بـ RCS650-6:
كيفية إعداد سلسلة مضخمات RCS الخاصة بك:
كيفية توصيل الأسلاك على التوازي لنظام 70 فولت:
ماذا يوجد في الصندوق:
- مضخم
- جهاز تحكم عن بعد
- أذنيات تثبيت على الحامل
- كابل الطاقة
- هوائي راديو FM
- فيديو تدريبي للإعداد وكيفية الاستخدام حتى تتمكن من تثبيته بنفسك
- الضمان
الوصف:
تفتخر روكفيل بتقديم سلسلة منتجات RCS الجديدة. RCS650-6 هو مضخم/مستقبل رقمي هجين قابل للتثبيت على الحامل بقدرة 650 واط و6 مناطق. هذا المضخم قادر على العمل بجهد 70 فولت، و100 فولت، و8 أوم، و4 أوم. مما يجعله مثاليًا للاستخدام في المطاعم/الحانات/المقاهي/الصالات/المدارس/قاعات المؤتمرات أو أي مكان آخر يتطلب العديد من السماعات.
يخرج هذا المضخم RCS650-6 بقدرة 650 واط عند 70 فولت أو 780 واط عند 100 فولت، ويمكن تقسيم الطاقة إلى 6 مناطق. (يوصي معظم المحترفين بعدم تجاوز 90% من طاقة المضخم، لذا نوصي ألا تتجاوز واط السماعات 600 إجمالاً على المحولات). يمكن لكل منطقة إخراج ما يصل إلى 200 واط، ويجب ألا تتجاوز جميع المناطق 650 واط. إذا كنت تريد كل 650 واط في منطقة واحدة، يمكنك استخدام المخارج المباشرة. إذا كنت تريد استخدام مناطق متعددة، يمكنك استخدام مخارج المناطق. على سبيل المثال، يمكن أن يكون لديك المنطقة 1 بقدرة 200 واط، والمنطقة 2 بقدرة 200 واط، والمنطقة 3 بقدرة 100 واط، والمنطقة 4 بقدرة 50 واط، والمنطقة 6 بقدرة 50 واط.这将 يبلغ إجمالي 600 واط وهو أقل من 650 واط التي يمكن للمضخم إنتاجها وأيضًا لا يتجاوز 200 واط الذي يمكن لكل منطقة إنتاجه.
التوصيل بسيط للغاية أيضًا. كل ما عليك فعله هو توصيل جميع السماعات على التوازي من واحدة إلى التالية. سيتم تضمين رابط فيديو في الصندوق لتدريبك على كيفية استخدامه.
مع 3 مداخل ميكروفون؛ كل منها مع تحكم بالصدى، يمكنك استخدام هذا المضخم للإعلانات أو الخطب أو حتى ليلة الكاريوكي! يتضمن هذا الطراز أيضًا زر جرس حتى تتمكن من إنشاء صوت جرس قبل الإعلانات. تتميز سلسلة RCS ببث الصوت عبر البلوتوث حتى تتمكن من تشغيل الموسيقى المفضلة لديك أو الوصول إلى قائمة تشغيل مباشرة من هاتفك! يتميز هذا المضخم أيضًا بمدخلين USB وSD مما يتيح لك تشغيل الصوت المخزن على محرك أقراص USB أو بطاقة SD. هناك أيضًا مدخلان للخط يسمحان لك بتوصيل جهاز صوتي آخر مثل مشغل MP3 أو مشغل أقراص مضغوطة أو تلفزيون وما إلى ذلك.
تمنحك مقابض التحكم في الصوت الفردية لكل منطقة من المناطق الست ومقابض التحكم في الصوت لكل مدخل من مداخل الميكروفون الثلاثة تحكمًا كاملاً في نظامك. إذا كنت تريد التحكم في الصوت في كل غرفة، يمكنك شراء أي من وحدات التحكم في الصوت بجهد 70 فولت المثبتة على الحائط مثل VOL70100.
تحمي وظيفة محدد القص المدمجة السماعات والمضخم من الحرارة الزائدة. لمزيد من الحماية، يوجد أيضًا نظام تبريد في هذا المضخم يحافظ على برودة المكونات مما يجعل المضخم متينًا وموثوقًا.
كان هدفنا مع سلسلة RCS هو تمكين أي شخص من تركيب أنظمة 70 فولت بنفسه دون إنفاق آلاف الدولارات على مقاول. يجعل RCS650-6 من السهل توصيل العديد من السماعات ومصادر خارجية متعددة. نحن نستخدم عن قصد مقابس شائعة مثل RCA و1/4 بوصة لجعل هذا المضخم أكثر عالمية وسهولة في الاستخدام. مع تصميمنا الفريد، يمكنك أن تكون واثقًا من قدرتك على القيام بذلك بنفسك عند تركيب نظامك التجاري!
ما هو نظام 70 فولت؟
أنظمة 70 فولت هي الخيار الأول لأي تطبيق تريد فيه تركيب سماعات متعددة. مع 70 فولت، هناك العديد من المزايا مقارنة بأنظمة 8 أوم. من أهم المزايا بساطة التوصيل وسهولة مطابقة السماعات مع المضخم. على سبيل المثال، مع هذا المضخم بقدرة 650 واط/70 فولت، يمكنك تركيب سماعات يبلغ إجمالي طاقتها حوالي 600 واط. لا يهم إذا كانت 18 سماعة بقدرة 30 واط لكل منها أو 36 سماعة بقدرة 15 واط لكل منها. يجب دائمًا أن يكون لديك مضخم 70 فولت بقدرة أكبر بنسبة 10% على الأقل من إجمالي الواط الذي يتم ضبط السماعات عليه. عندما نقول كلمة
70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads. The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS650-6 is your best choice!
Applications:
- Restaurant
- Bar
- Café
- School
- Lounge
- Home (Multi-zone, Multi-room)
- Office
- Warehouse
Features:
- Rockville RCS650-6 650 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
- Capable of 70 volt, 100 volt, 8 ohm, and 4 ohm
- 70V RMS Power: 650 Watts
- 100 volt RMS Power: 780 Watts
- 6-Zones - each zone has a separate volume control and you can easily add wall volume controllers as well
- Each zone can output 200 watts at 70 volts and the entire amp can output 650 watts total RMS
- You can use the direct output and get 650 watts to a single zone or you can use the zone outputs and get up to 200 watts per zone with all zones combined not exceeding 650 watts
- Built in Bluetooth audio streaming
- FM radio tuner
- USB input to play audio stored on a thumb drive (32gb max)
- SD card slot to play music stored on an SD Card (32gb max)
- Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
- Echo control for the mic inputs with speed and repeat adjustments
- Built in clipping limiter to protect the amp and speakers
- BASS and Treble control
- Chime button for making announcements
- Top quality aluminum panel with industrial grade knobs
- 5 segments signal level indication
- Built in cooling system keeps component cool at all times
Inputs and Outputs:
- (1) Set RCA AUX inputs
- (3) Mic inputs
- RCA Line output
- 100V speaker red positive speaker output terminal
- 70V speaker red positive speaker output terminal
- 8 Ohm red positive speaker output terminal
- Shared negative speaker output terminal
Specifications:
- Power Requirements: 120V / 50-60Hz
- A Weighted Signal to Noise (@ 1W) -70.2dBA
- A Weighted Signal to Noise (referenced to full 4 ohm power) -93.9dBA
- Frequency Response: 42Hz to 20 Khz
- Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.65%
- Weight: 31.7 lbs
- Dimensions: 19" x 16" x 4" inches
All About Your WA6570:
How To Set Up Your WA6570:
How To TAP Your WA6570 Speakers:
Description of WA6570:
Rockville WA6570 pair of In-Wall 70V speakers are perfect for keeping a clean look in your office or restaurant. These speakers feature high-end components from start to finish to give you a clear and balanced sound with great power handling.
The transformer taps (70.7V) are 40W/20W/10W/5W/8 ohms 1. The 6.5" woofer uses a glass fiber cone that gives great low/mid frequencies 1. The tweeter is a silk dome 1" tweeter to give you tamed and balanced high frequencies that sound pure and real.
The speaker design looks really nice when you install it. It blends into the wall and the grill is paintable which is great if you have bright colored walls and you want to blend the speaker into the wall. The design looks really cool with beveled fine imprint details.
Installation is quite easy with our easy-to-follow installation and how-to-use videos.
What is 70 volt?
70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 350 watts and you can install speakers that total close to 300 watts. It does not matter if it is 15 speakers that are 20 watts each or 50 speakers that are tapped at 5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at.
When we say the word tap, what we are referring to are the selectors these speakers have on them. For example, these speakers have selectable options of 5w, 10w, 20w, and 40w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 20 watts, and the ones in the hallway at 2.5 watts.
Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, in-wall speakers, subwoofers, etc.
70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads.
The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
70V Power Options:
- 40W
- 20W
- 10W
- 5W
- 8 ohms (transformer bypass)
Features:
- Pair of Rockville WA6570 6.5" In-Wall 70V Commercial Speakers w Kevlar Woofer and Silk Dome Tweeters
- Transformer Taps (70.7V): 40W/20W/10W/5W/8 ohms
- Kevlar Cone
- Rubber Surround
- 6.5" Woofer
- 1" Aluminum Voice Coil
- 1" Silk Dome Tweeter
- Swivel tweeter
- 5-way tap switch on the front panel with easy access thanks to the magnetic grill
- 23 oz. Ferrite Magnet
- Built in 12dB/octave crossover (cutoff frequency is 3KHz)
- Easy to mount inside your wall
- High Quality Spring Loaded Push Terminals
- Paintable Flush Mount Grills
- Magnetic grill
- Speaker is designed to look beautiful with or without the grill
- Frequency Response: 60Hz - 20KHz
- Sensitivity: 86.8dB @ 1w / 1m
- Impedance: 8 Ohms (When setting tap switch to 8 ohm setting)
- Mounting Depth: 3.375"
- Cut-out Dimension: 12.5" x 7.7"
- Unit dimensions: 13.75" x 9.1"
- Color: White (paintable)
- Easy to follow installation and how-to-use videos









